1.MUT-3 ชุดประหยัด ราคา 32,900 บ.
ไม่มี CF Card ใช้งานโดยต่อผ่านคอมพิวเตอร์โน๊ตบุ๊ต
2.MUT-3 Full Version ชุดเต็มฟังชั่น ราคา 38,500 บ.
ใช้สำหรับทดสอบกับรถยนต์นั่ง และ รถบรรทุก FUSO ได้ด้วย
มี CF Card บันทึกเก็บข้อมูล และ รองรับการทำรีโปรแกรม
pls note it doesn't have card in the package,this is cd version,work with any computer or laptop,sysytem is xp,not window 7.
this is only for cars,if you want to do trucks,you need to buy the
additional cables for trucks.
In accordance with releasing new products that introduce CAN
communications systems, MMC has developed the MUT-III as a next
generation diagnosis tester for servicing these new and future vehicles.
personal computer (PC) is connected to the MUTIII unit and used as a
system's control terminal, and communicates with a vehicle ECU through
addition to being able to handle all diagnosis functions covered by the
conventional MUT-II tester,
the MUT-III system can display data as
easy-to-understand diagrams and graphs on a large screen of the PC.
Unlike the MUT-II, the MUT-III can retain data on all vehicles from 1995
to new models, classified according to destination in the PC's hard
eliminates the awkward but essential job with the MUT-II, of switching
the data list (communications protocol data and diagnosis item list
database) by replacing the ROM pack with another according to the
vehicle model and year model.
functions that make use of the advantages of the PC are also being
developed. For example, the workshop manual viewer is a useful function
for mechanics as they no longer have to carry around a thick manual and
search for relevant pages while working on a vehicle.
manual viewer is currently available for certain vehicle models, and
allows users to retrieve the pages containing the failure code for a
particular problem at the push of a button.
MUT-3 PC software application supports following languages :
Vehicle Communication Interface (V.C.I.) (MB991824)
A communication interface used to connect the vehicle
ECUs and the PC.
1. When connected with the PC
- Vehicle diagnosis (Interactive fault diagnosis)
- SWS communication; CAN communication support
- Drive recorder
- Volt, Ohm, measurement
- Fuel pressure measurement (Not available in US)
2. When used with the V.C.I. unit (disconnected from PC)
- V.C.I. Stand-alone diagnosis
- Drive recorder
- ECU reprogramming
- Volt, Ohm measurement
- Belt Tension measurement
(3) Memory Card (Option)
Stores data for ECU reprogramming, drive recorder, etc.
This is a standard, off-the-shelf memory card.
The one provided (with reprogramming data) is a Compact Flash
memory card (MB991853) inserted into the CF card adapter
(4) M.U.T.-III Main Harness A (MB991910)
Used when connecting the V.C.I. with vehicles that have
only one 16-pin diagnosis connector.
- Supports fault diagnosis and ECU updating on the
- Supports the CAN communication system
(5) M.U.T.-III Main Harness B (MB991911)
Used when connecting V.C.I. with vehicles that have a
16-pin + 12-pin or 16-pin + 13-pin diagnosis connector.
For models equipped with only 12-pin (or 12-pin + 12-pin)
diagnosis connector, connect the M.U.T.-II adapter harness
(MB991498) to the end of this harness in the same as
M.U.T.-II, and power is supplied from the cigarette lighter